Browsing Category

Electronics

Cosplay & Props Electronics Source Code Titanfall

Arc Grenade Code

By
on
January 18, 2017

Following up my previous posts breaking down some of the parts for the Arc Grenade and showing some of the wiring, I thought it would be appropriate to…

3D Printing Cosplay & Props Electronics Titanfall

Lights and Sound – Test Assembly

By
on
January 17, 2017

I’ve made a bit of progress on the Arc Grenade that I’d like to share, so let me catch up with a couple of pictures. None of this wiring…

3D Printing Cosplay & Props Electronics Titanfall

Jump around, jump around!

By
on
January 11, 2017

While waiting for parts for my printer, I have also been working on something bigger than the grenade – a pilot jump kit. For the unfamiliar, the ‘pilots’ in…

3D Printing Cosplay & Props Electronics Titanfall

Tick, tick, boom!

By
on
January 11, 2017

While I’ve been waiting for my damn printer repair parts to get shipped, I started poking around the internet for more Titanfall ideas.┬áJurica Pranjic on MyMiniFactory was nice enough…

3D Printing Cosplay & Props Electronics Titanfall

Home from the Holidays

By
on
January 4, 2017

I actually got as far as assembly and painting after filming the video above, but I suffered some setbacks. For what it’s worth, assembly is a relative breeze:

Unfortunately, once…

3D Printing Cosplay & Props Electronics Titanfall

Redesign for the Jewel

By
on
December 15, 2016

So I got the data knife printed out pretty much in entirety and have noticed some things I wanted to address. Pictures first, though!

It is…

3D Printing Cosplay & Props Electronics Titanfall

Borrowing a Laser Cutter!

By
on
December 15, 2016

Progress continues after a bit of a fight with my 3d printer. It kept randomly shifting layers over on me and ruining prints. I was able to ascertain (thanks…

3D Printing Cosplay & Props Electronics Titanfall

Titanfall Data Knife

By
on
December 13, 2016

I have been loving Titanfall 2, and I am not a guy who usually likes shooters. I enjoyed Titanfall 1, but 2 just clicks for me. I picked up…

Cosplay & Props Electronics Immortan Joe

Arduino-Controlled Breathing

By
on
September 10, 2016

One of the things I decided the mask needed was the ability to control the airflow the fans produced through the hoses and into the mask. The easiest way…

3D Printing Cosplay & Props Electronics Immortan Joe

Now with working airflow!

By
on
July 27, 2016

This is exciting – it’s actually doing the job! It’ll only get better once everything is properly fitted, but I really need the airbag itself done before I can…

3D Printing Cosplay & Props Electronics Immortan Joe

Bottlecaps and big ideas

By
on
July 9, 2016

I decided to make my life easy again by manufacturing a quick little guide to help me drill the holes at a fixed distance and orientation:

Works like a charm!

With…

3D Printing Cosplay & Props Electronics Star Lord

Step-by-Step Earpiece Electronics

By
on
October 8, 2014

Here’s a quick step-by-step for the earpiece. I popped this one out of my 3d printer as a demonstration piece and have only hit it with silver spray paint…

Cosplay & Props Electronics

Electronics and Detailing

By
on
August 23, 2014

Original audo circuit on left, mine on right. I figured out the points to jump power across and used 3xAA batteries to replace the 3 1.5v coin cells, just…