FFXIV Warrior - Malignant Moggle Mogaxe
EXTRA MEDIA
IMAGE GALLERY
3D printable files for a 1:1 scale axe – the “Malignant Moggle Mogaxe” – from Final Fantasy XIV. This axe is huge – designed to be about 50 and a half inches from end-to-end. It has been broken into multiple parts with flat-facing sides to make the printing process on an FDM printer as straightforward as possible. Supports should be minimal for most parts, and the parts are designed with pin-holes along the edges to help you reinforce and align them during assembly.
All print files are provided in .STL format. Files include:
- Main axe blade, sliced into ten (10) separate printable sections with alignment holes through the center and sides of each. The left and right halves are symmetrically designed.
- Back ‘wing’ blade, sliced into four (4) separate printable parts with alignment holes. The left and right halves are symmetrical.
- Hilt and handle components, sliced into seven (7) separate parts. Alignment holes included.
- The top ‘crown’ of the axe, consisting of five (5) models – the topper, the base, the core, the post, and the cage pieces (which you will need to print 6 of).
- The collar that sits below the axe head on the handle, consisting of two (2) models, left and right halves.
- The bottom crescent, separated into three (3) models – left and right arcs, and an interfacing part to connect to the handle.
- The ring mid-way up the handle, as a single model.
- A set of 3D-printable dowel pins to lock all of the axe head components together during assembly.
These files DO NOT include:
- Technical support. This listing presumes you know how to slice, print, and assemble 3D print files.
These assets may not be resold, redistributed, or otherwise conveyed to a third party.