The printed right-angle pipe fitting seems to have worked out pretty well, all things considered! I need to sand it a bit, glue the parts together, then XTC-3D the whole thing to give it
While I was waiting for some things to dry and some other things to print, I took a crack at modeling up the back fixture to connect the hose and the airbag together. I
Molds were made up for the arm bucks using Smooth-On’s Rebound 25 mold rubber and backed with some old Onyx Fast resin I had that I had to get rid of. We filled them
Here’s a problem and a solution all in one post! The screen-accurate gas mask hose that connects from the air bladder behind his head to his mask is actually a combination of two different
We spent a good bit of time last night lengthening the master copies of each of these things out with monster clay to fit my apparently-freakishly-long arms. Figured it’d be easiest just to do
I took some time today while we were working on the rest of the project to design up what I think will be a workable fixture for the air filters. The cone on the front
Truth be told, I was not satisfied with the K&N filters I had just due to their squat profile. I ended up rereading the other Immortan Joe thread on TheRPF and saw that forums
Thanks to Logan74k at TheRPF.com, I’ve been alerted to the fact that the rivet arrangement is actually mirrored across both shoulders, despite the fact that the bottlecaps are only on one of them. I wonder
I decided to make my life easy again by manufacturing a quick little jig to help me drill the holes I needed through my bottlecaps at a fixed distance and orientation so that it’d
I decided this project was going to be something I finished for NYCC, and it is warm enough that I don’t mind dusting off my workspace again, so I’m chugging through getting the rest
You've reached the end of this content!
Looks like there's nothing here!
